Complete technical data sheet with print conditions, material properties, and performance specifications.
| Manufacturer | Polymaker | |
| Product Name | PolyMax PLA | |
| Filament Type | PLA | |
| Finish | Nano-reinforced |
| Nozzle Temperature | 190-230°C | |
| Bed Temperature | 25-60°C | |
| Print Speed | 50-200mm/s | |
| Cooling Fan | On | |
| Retraction Distance | 1-3mm | |
| Retraction Speed | 20-40mm/s | |
| Build Surface Materials | Glass PEI |
| Diameter | 1.75-2.85mm | |
| Density | 1.17-1.24g/cm³ | ISO1183, GB/T1033 |
| Melt Index | 5-8g/10 min | 210°C, 2.16kg |
| Glass Transition Temperature | 61°C | DSC, 10°C/min |
| Melting Temperature | 149°C | DSC, 10°C/min |
| Crystallization Temperature | 112°C | DSC, 10°C/min |
| Vicat Softening Temperature | 62°C | ISO 306, GB/T 1633 |
| Heat Deflection Temperature @ 1.8MPa | 52°C | ISO 75 |
| Heat Deflection Temperature @ 0.45MPa | 55°C | ISO 75 |
| Young's Modulus (X-Y) | 2150.8MPa | ISO 527 |
| Tensile Strength (X-Y) | 41.3MPa | ISO 527 |
| Elongation at Break (X-Y) | 5.7% | ISO 527 |
| Bending Modulus (X-Y) | 2393.2MPa | ISO 178 |
| Bending Strength (X-Y) | 62MPa | ISO 178 |
| Notched Charpy Impact Strength (X-Y) | 38.9kJ/m² | ISO 179 |
| Effect of Weak Acids | Good | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/pla/polymax-tm-pla |
| Effect of Strong Acids | Poor | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/pla/polymax-tm-pla |
| Effect of Weak Alkalis | Fair | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/pla/polymax-tm-pla |
| Effect of Strong Alkalis | Poor | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/pla/polymax-tm-pla |
| Effect of Oils and Grease | Good | https://wiki.polymaker.com/polymaker-products/more-about-our-products/documents/technical-data-sheets/pla/polymax-tm-pla |